Specialized powder equipment, we are your best choice.
Energy Saving Jet Mill

+ Fluidized Bed Classifying Jet Mill
+ Lab Classifying Jet Mill
+ Energy Saving Jet Mill
+ Rotary Classifying Jet Mill
+ Jet Pulverizer
+ Inert Gas Protection Classifying Jet Mill
+ Turbine Air Jet Mill
+ Steam Jet Mill
+ Nano Steam Jet Mill

+ Precision Air Classifier
+ O-Sepa High Efficiency Air Classifier
+ Multi-grade Air Classifier

+ Classifying Impact Mill
+ Impact Mill
+ Centrifugal Impact Mill
+ Shaping Mill

+ Abrasive Powder Classifying Jet Mill/ Shaping
+ Diamond Classifying Jet Mill/shaping Mill
+ Rare Earth Polishing Classifying Jet Mill
+ Glass Beads Classifying Jet Mill
+ Pharmaceutical&food Superfine Pulverizer
+ Highly Reactive Powder Pulverizer
+ Pesticide Industry-specific Jet Mill
+ Petroleum Coke Grinding Machine
+ Silicon Jet Mill
+ Beans Ultrafine Pulverizer
+ Battery Material Classifying Pulverizer
+ Graphite Spheroidization Mill
+ Sulfur Pulverizer

+ Bag Collector
+ Filtration Collector
+ Anti-explosion Collector
+ Anti-static Collector
+ Cyclonic Collector
+ Workshop Purification System
+ Glove Box

+ Ultrafine Powder Processing Line
+ Fly Ash/steel Slag/ Water Slag Superfine Powder Production Line
+ Powder Pneumatic Conveying
+ Waste Circuit Board Separation Pulverizing Line



Energy-saving Jet Mill is a newly developed grinding equipment based on the fluid energy conversion character in adiabatic flow process. It makes the most of fluid pressure and internal energy to grind material with a high efficient and saves about 30% energy than other ordinary grinding equipment.
1.High energy utilization
◆The air compressor used for ordinary jet mills prevent operation fault caused by high exhaust temperature. A higher pressure is got through intercooling for multistage compression,the more stages it is, the lower the energy utilization rate is, for instance,the energy utilization in the primary compression is 78% and 58% when it`s in secondary compressor.
◆Energy-saving Jet Mill adopts Primary high exhaust temperature compressed gas to grind material and the grinding force is the same with secondary compressor. Using the energy of air temperature prevents energy loss in cold and heat offset during intercooling in compressor.
2.Helpful in material grinding
Materials with joints and fissures weak effect plane such as :Talc, wollastonite, etc, are easily ground due to thermal expansion effect.
3.Materials are dried after warming.
■Application field
■Main technical parameter
Air Flow
Max Feed Size
Product Size (d50)
LNSE-36A 6m3/min 0.3-0.4Mpa <3mm 2-100um 50-300kg/h 44kw
LNSE-60A 10m3/min 0.3-0.4Mpa <3mm 2-100um 100-500kg/h 56kw
LNSE-120A 20m3/min 0.3-0.4Mpa <3mm 2-100um 200-1000kg/h 114kw
LNSE-240A 40m3/min 0.3-0.4Mpa <3mm 2-100um 300-2000kg/h 205kw
Note: the parameter above is for sigle-classification, multi-classification is customised design.